Spiral wound gaskets can be used for fluid sealing, the pressure can reach 250bar, and the applicable temperature is -200°C to 1000°C, the gasket is widely used in oil, gas, petrochemical and engineering industries.
Download PDF Submit your InquirySpiral wound gaskets can be used for fluid sealing, the pressure can reach 250bar, and the applicable temperature is -200°C to 1000°C, the gasket is widely used in oil, gas, petrochemical and engineering industries.
NO. | Type | Thickness(mm) | |
---|---|---|---|
1711 | Basic form | 3.2 | 4.5 |
1712 | With inner ring | 4.5 | |
1713 | With outer ring | 4.5 | |
1714 | With inner and outer ring | 4.5 |
Structure type
Filler | Hoop | IR | OR |
---|---|---|---|
Asbestos | SUS 304 | CS | CS |
Graphite | SUS 316 | SUS 304 | SUS 304 |
PTFE | SUS 316L | SUS 316 | SUS 316 |
SUS 316L | SUS 316L |
The table below may be used for selected material of inner ring and winding metal:
Trade name | AISI | Hardness(HB/HV) | Temperature°C |
---|---|---|---|
Stainless steel | 304 | 130-180 | -250 - +550 |
Stainless steel | 316 | 130-180 | -100 - +550 |
Stainless steel | 316L | 130-190 | -100 - +550 |
The outer ring is generally manufactured from carbon steel with an anti corrosion treatment The table below may be used for determining the correct filler:
Filler material | Temperature °C | Max operating pressure(kg/cm2) |
---|---|---|
Graphite | -200-+500 | 250 |
Asbestos | -150-+450 | 100 |
PTFE | -240-+260 | 100 |
Flange tyke and Spiral Wound Gasket form:
Flange type | Shape |
---|---|
Flat face flange(F.F) | Gasket with an outer ring |
Gasket with an inner and outer ring | |
Raised face flange(R.F) | Gasket with an outer ring |
Gasket with an inner and outer ring | |
Male and female flange(M & F) | Basic form gasket |
Gasket with an inner ring | |
Tongue and groove Flange(T & F) | Basic form gasket |
Gasket with an inner ring | |
Flat and groove flange (F & G) | Basic form gasket |
Gasket with an inner ring |
Tolerances of thickness:
Item | Thickness(mm) | Tolerances(mm) |
---|---|---|
Gasket thickness | 4.5, 3.2 | +0.2 -0.1 |
Ring thickness | 3.0 | ±0.24 |
Tolerances of ID & OD:
DIN(mm) | ANSI B16.5 BS1560(mm) Mss sp-44 | API 605 | Tolerances | |
---|---|---|---|---|
Inner ring I.D. Gasket I.D. | ≤600 | ≤24 | ≥26 and ≤34 | ±0.5 |
>600 and ≤1600 | >24 and ≤34 | >36 and ≤60 | ±0.9 | |
>800 and ≤1600 | >34 and ≤60 | ±1.3 | ||
>1600 | >60 | ±1.6 | ||
Gasket O.D. | ≤600 | ≤24 | ≤24 | ±0.9 |
>600 and ≤1600 | >24 and ≤60 | >24 and ≤60 | ±1.8 | |
1600 | >60 | ±2.2 | ||
Outer ring 0.D. | >1/2 and ≤60 | ±0.9 | ||
≤600 | ≤24 | 0 - 1.0 | ||
>600 and ≤1000 | >24 and ≤34 | 0 - 1.8 | ||
>1000 and ≤1600 | >34 and ≤60 | 0 - 2.2 |